Dashboard setup

Units, battery, speed and display. Works from a phone over Bluetooth, or from a computer with the USB cable.

1Connect the dashboard

Switch the dashboard on and keep it close. Bluetooth works in Chrome on Android and in Chrome / Edge on a computer (iPhone: the free Bluefy browser). USB cable works in Chrome / Edge on a computer.

Not connected.

2Product key

Activates this dashboard. The key comes with your dashboard (or from your seller) and only works on the dashboard with this device ID.

Device ID- Status-

3Units

Speed and distance on the dashboard.

4Battery

Used for battery %, range and the charging screen. It is printed on the battery label (e.g. "13S 15Ah" or "48V 15Ah").

5Speed

"From the VESC" shows the same speed as the VESC app (it uses the motor and wheel settings in VESC Tool). Choose "Calculated" only if that speed is wrong and you cannot fix it in VESC Tool.

10" tyre = about 254 mm
Magnets / 2 (hub motors often 15)
Hub motor = 1.00

6VESC Bluetooth

Only needed if your VESC Express is set to "Enabled and Encrypted" in VESC Tool.

More settings

Display

Changing it restarts the dashboard (only while the scooter stands still).

Riding

Turns the screen off when no VESC is connected and it was not touched for that long (prevents burn-in). A touch or the VESC wakes it.
Only used to show riding modes in amps. Riding modes themselves are edited on the dashboard (MODES tab).

Bluetooth (advanced)

Lets this website connect to the dashboard over Bluetooth (with a code shown on the dashboard the first time). The USB cable always works.
Leave "auto" unless told otherwise.
Connect the dashboard to change its settings.